Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 268
| Issue Date | Title | Author(s) |
| 2021 | Durability assessment and microstructural analysis of 3D Printed concrete exposed to sulfuric acid environments | Aouad, Georges |
| 2021 | Incorporation of zinc in calcium sulfoaluminate cement clinker | Aouad, Georges |
| 2021 | Influence of the mix composition on the thixotropy of 3D printable mortars | Aouad, Georges |
| 1-Feb-2021 | Inter-layer reinforcement of 3D printed concrete elements | Baz, Bilal; Aouad, Georges ; Khalil, Noura; Remond, Sébastien |
| 2014 | تعريفات في موضوع الضوضاء وطرق قياسها | Hoz, Mervat El; Kamali, W |
| 2020 | Value-added waste latex paints in masonry cement for plastering applications | Assaad, Joseph |
| 2020 | Use of Ceramic-Waste Powder as Value-Added Pozzolanic Material with Improved Thermal Properties | Arab, Amir Al; Hamad, Bilal; Assaad, Joseph |
| 2017 | Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars | Khalil, Noura; Aouad, Georges ; Cheikh, Khadija El; Rémonda, Sébastien |
| 2018 | The use of calcium sulfoaluminate cement to mitigate the alkali silica reaction in mortars | Kleib, Joelle; Aouad, Georges ; Louis, Ghislain; Zakhour, Mirvat; Boulos, Madona; Rousselet, Angelique; Bulteel, David |
| 2020 | The use of calcium sulfo-aluminate cement as an alternative to Portland Cement for the recycling of municipal solid waste incineration bottom ash in mortar | Antoun, Marc; Becquart, Frédéric; Gerges, Najib N. ; Aouad, Georges |
| 2013 | Use of Analog Models to Simulate Flow Recession of Karstic Springs | Saba, Marianne ; Carlier, Eric; Gerges, Najib N. |
| 2018 | Uncertainty Quantification for Structural Health Monitoring Applications | Nasr, Dana ; Slika, Wael G.; Saad, George A. |
| 2014 | Ultimate response of stainless steel continuous beams | Theofanous, M.; Saliba, Najib G. ; Zhao, O; Gardner, Leroy |
| 2020 | The Typological Classification of the Old Lebanese Churches in Koura, Batroun and Byblos, from the 8th Century to the 13th Century | Issa, Ghassan A. |
| 2019 | Thixotropy and interfacial bond strengths of polymer-modified printed mortars | Sakka, Fatima El; Assaad, Joseph ; Hamzeh, Farook R.; Nakhoul, Charbel |
| 2001 | Tests on slender reinforced concrete columns | Khalil, Nariman ; Cusens, Anthony R.; Parker, M.D |
| 2018 | Testing and modeling the behavior of sandwich lightweight panels against wind and seismic loads | Assaad, Joseph ; Chakar, Elie; Zéhil, Gérard-Philippe |
| 2006 | Technical Evaluation of Waste Composting Plant | Hoz, Mervat El |
| 1995 | The Sum- and Difference-Frequency Wave Loads and Motions of a Freely Floating Circular Cylinder | Moubayed, Walid ; Williams, A. N |
| 2018 | Suitability of Static Yield Stress Evolution to Assess Thixotropy of Flowable Cementitious Materials | Assaad, Joseph |
Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 268
