Full Name
Nehme, Gabi
Title
Associate Professor
Category
Full time faculty
 
 
 
 
UOB Author ID
A1025
 
Campus
Koura
 
UOB join date
29-09-2004
 
End Date
31-08-2023
 
Office
EC 238
 
Phone Extension
5848
 

Refined By:
Date Issued:  [2010 TO 2019]
Author:  Nehme, Gabi

Results 1-20 of 26 (Search time: 0.0 seconds).

Issue DateTitleAuthor(s)
12013Analysis of fluorinated interactions in plain ZDDP and fully formulated oils using design of experiment (DOE) and chemistry characterization of tribofilms in boundary lubrication under extreme loading conditionsNehme, Gabi 
22010Effect of contact load and lubricant volume on the properties of tribofilms formed under boundary lubrication in a fully formulated oil under extreme load conditionsNehme, Gabi ; Mourhatch, Ramoun; Aswath, Pranesh B.
32013The effect of cyclic speed on the wear properties of molybdenum disulfide greases under extreme pressure loading using 4 balls wear testsNehme, Gabi 
42011Effect of extreme contact load under two different rotational speeds on reduced phosphorus plain ZDDP oil in the presence of 1per cent FeF3 catalystNehme, Gabi 
52012Effect of extreme load on plain ZDDP oil in the presence of FeF3 catalyst using design of experiment and fundamental study under two different rotational speedsNehme, Gabi 
62011Fluorinated FeF3 catalyst interactions in three different oil formulations using design of experiment optimization and chemistry characterization of tribofilmsNehme, Gabi 
72012Fluorinated interactions in two different plain ZDDP oils using design of experiment (DOE) and chemistry characterization of tribofilmsNehme, Gabi 
82011Fluorinated mix in plain ZDDP oil and commercial oil using design of experiment analysis of all interactions and fundamental study of fluorinated mix in plain ZDDP oils under 2 different r/min test cycles and extreme boundary lubricationNehme, Gabi ; Dib, Micheline
92016Friction and wear reductions in fluorinated plain and fully formulated oils through enhanced heating time using moderate loading under boundary lubrication conditionsNehme, Gabi 
102011Impact of pressure distribution on the relief areas of prosthetic sockets for transtibial amputees using design of experiment and finite element analysisNehme, Gabi ; Dib, Micheline
112014The impact of surface roughness and PTFE/TiF3/FeF3 additives in plain ZDDP oil on the friction and wear behavior using thermal and tribological analysis under extreme pressure conditionNehme, Gabi ; Ghalambor, Saeed
122015The importance of 2 per cent PTFE/FeF3 additives in engine fully formulated oil for reducing friction and wear under boundary lubrication conditionNehme, Gabi ; Ghalambor, Saeed
132018The importance of spectrum loading in 2% milled MoS2 powder greases using four ball wear testNehme, Gabi 
142013The Importance of Variable Speeds under Extreme Pressure Loading in Molybdenum Disulfide Greases Using Four-Ball Wear TestsNehme, Gabi 
152011Interactions of fluorinated catalyst and polutetrafluoroethylene in two different plain zinc dialkyldithiophosphate oils and one fully formulated oil using design of experimentNehme, Gabi 
162014Optimization of extreme load and break-in period in plain ZDDP oil with FeF3 catalyst using design of experiment and fundamental study under different speedsNehme, Gabi ; Dib, Micheline
172014Optimization of important relief areas in prosthetic socket for below-knee amputees using design of experiment and finite element modelNehme, Gabi ; Ghalambor, Saeed
182017Optimization of mechanism boundary lubrication in fully formulated commercial engine oil using design of experimentNehme, Gabi ; Dib, Micheline
192010Optimization of mechanism of boundary lubrication in fully formulated commercial engine oil using design of experimentNehme, Gabi ; Dib, Micheline
202015Phosphorus reduction in plain and fully formulated oils using fluorinated additivesNehme, Gabi