Collection's Items (Sorted by Submit Date in Descending order): 61 to 80 of 152
| Issue Date | Title | Author(s) |
| 2007 | Mechanics of laminated composite containing marcel defects | Rai, Habib ; Honein, Elie ; Najjar, Michel |
| 2006 | The material force acting on a screw dislocation in the presence of a multi-layered circular inclusion | Honein, Elie ; Rai, Habib ; Najjar, Michel |
| 2011 | Interactions of fluorinated catalyst and polutetrafluoroethylene in two different plain zinc dialkyldithiophosphate oils and one fully formulated oil using design of experiment | Nehme, Gabi |
| 2019 | Interaction magnetic field formulation of permanent magnets based on Baker's rotational magnetic propulsion device | Rishmany, Jihad ; Sabiini, Guitta |
| 2019 | Influence of electrode spacing on a symmetrical washer-type electrohydrodynamic conduction pump | Daaboul, Michel ; Traore, Philippe; Modh, Sachin; Louste, Christophe |
| 2014 | The impact of surface roughness and PTFE/TiF3/FeF3 additives in plain ZDDP oil on the friction and wear behavior using thermal and tribological analysis under extreme pressure condition | Nehme, Gabi ; Ghalambor, Saeed |
| 2011 | Impact of pressure distribution on the relief areas of prosthetic sockets for transtibial amputees using design of experiment and finite element analysis | Nehme, Gabi ; Dib, Micheline |
| 2016 | Friction and wear reductions in fluorinated plain and fully formulated oils through enhanced heating time using moderate loading under boundary lubrication conditions | Nehme, Gabi |
| 2018 | Finite element modelling of a cold curved steel plate girder | Rishmany, Jihad ; Tawk, Issam ; Gergess, Antoine |
| 2016 | Feedback on assessment: a dynamic factor in an iterative educational cycle | Jadayel, Roula; Iaaly, Amal ; Tawk, Florence |
| 2020 | Experimental study of the interlaminar fracture of composite materials in mode III by MSCB test | Tawk, Issam ; Rishmany, Jihad ; Saba, Nicolas ; Navarro, Pablo; Ferrero, Jean-Francois |
| 2020 | Experimental models of the variation of HFE-7100 and HFE-7000 electric properties with temperature | Nassar, Michelle; Vázquez, Pedro A.; Chauris, Nicolas; Daaboul, Michel ; Michel, Anny; Louste, Christophe |
| 2019 | Experimental and numerical study of the damage mechanisms in hybrid unidirectional/woven composites under impact loading | Mahmoud, Bassam; Manseri, L.; Rogani, A.; Navarro, Pablo; Marguet, Steven; Ferrero, Jean-Francois; Tawk, Issam |
| 2016 | Engineering graduates' skill sets in the MENA region: a gap analysis of industry expectations and satisfaction | Ramadi, Eric; Ramadi, Serge; Nasr, Karim |
| 2018 | Electroconvective cavity flow patterns created by asymmetric electrode configuration | Louste, Christophe; Romat, Hubert; Traore, Philippe; Daaboul, Michel ; Vazquez, Pedro; Sosa, Roberto |
| 2012 | The effect of FeF3/TiF3 catalysts on the thermal and tribological performance of plain oil ZDDP under extreme pressure loading | Nehme, Gabi |
| 2012 | Effect of extreme load on plain ZDDP oil in the presence of FeF3 catalyst using design of experiment and fundamental study under two different rotational speeds | Nehme, Gabi |
| 2011 | Effect of extreme contact load under two different rotational speeds on reduced phosphorus plain ZDDP oil in the presence of 1per cent FeF3 catalyst | Nehme, Gabi |
| 2013 | The effect of cyclic speed on the wear properties of molybdenum disulfide greases under extreme pressure loading using 4 balls wear tests | Nehme, Gabi |
| 2010 | Effect of contact load and lubricant volume on the properties of tribofilms formed under boundary lubrication in a fully formulated oil under extreme load conditions | Nehme, Gabi ; Mourhatch, Ramoun; Aswath, Pranesh B. |
Collection's Items (Sorted by Submit Date in Descending order): 61 to 80 of 152
