Please use this identifier to cite or link to this item: https://scholarhub.balamand.edu.lb/handle/uob/633
Title: Inelastic response of simply supported i-girders subjected to weak axis bending
Authors: Gergess, Antoine 
Sen, Rajan
Affiliations: Department of Civil and Environmental Engineering 
Issue Date: 2001
Publisher: Elseiver
Part of: Proceedings of the International Conference on Structural Engineering, Mechanics and Computation
Start page: 243
End page: 250
Conference: International Conference on Structural Engineering, Mechanics and Computation (2 – 4 April 2001 : Caper Town, South Africa) 
Abstract: 
Mechanical loads are widely used for straightening or curving steel girders used in buildings. In this operation, concentrated forces are applied to a girder on simple supports to induce permanent deformations about its weak axis. Closed form solutions are developed to define the load versus residual deflection response for the particular case in which simply supported symmetrical girders are bent by a single concentrated load or two equal concentrated loads. This chapter discusses the effect of cantilevered ends, a more common situation for fabricators, where bending is induced over shorter lengths using a movable bending fixture. A numerical example is included to explain the application of the equations derived. These equations permit optimization of the cold bending/straightening operation.
URI: https://scholarhub.balamand.edu.lb/handle/uob/633
Type: Conference Paper
Appears in Collections:Department of Civil and Environmental Engineering

Show full item record

Record view(s)

2
checked on Oct 23, 2021

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.