Collection's Items (Sorted by Submit Date in Descending order): 161 to 180 of 425
| Issue Date | Title | Author(s) |
| 2-Jun-2022 | Bond properties between smooth carbon fibre-reinforced polymer bars and ultra-high performance concrete modified with polymeric latexes and fibres | Khalil, Nariman ; Assaad, Joseph |
| 2020 | Traffic-Lights-Based Guidance System in Lebanon using Network Optimization | Khoderchah, Elie; Jazzar, Ibrahim; El-Zahab, Samer; Semaan, Nabil ; Al-Sakkaf, Abobaker |
| 2020 | Optimizing Ambulance Paths: Case Study of Red Cross Tripoli Branch | Rafka, Elissa; Baroudi, Nadia; El-Zahab, Samer; Semaan, Nabil ; Al-Sakkaf, Abobakr |
| 2021 | Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments | Baz, Bilal; Aouad, Georges ; Kleib, Joelle; Bulteel, David; Remond, Sébastien |
| 2021 | Incorporation of zinc in calcium sulfoaluminate cement clinker | Aouad, Georges |
| 6-Mar-2022 | Influence of the mix composition on the thixotropy of 3D printable mortars | Aouad, Georges |
| 2021 | Inter-layer reinforcement of 3D printed concrete elements | Baz, Bilal; Aouad, Georges ; Khalil, Noura; Remond, Sébastien |
| 2014 | تعريفات في موضوع الضوضاء وطرق قياسها | Hoz, Mervat El; Kamali, W |
| 2020 | Value-added waste latex paints in masonry cement for plastering applications | Assaad, Joseph |
| 2020 | Use of ceramic-waste powder as value-added pozzolanic material with improved thermal properties | Arab, Amir Al; Hamad, Bilal; Assaad, Joseph |
| 2017 | Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars | Khalil, Noura; Aouad, Georges ; Cheikh, Khadija El; Rémonda, Sébastien |
| 2018 | The use of calcium sulfoaluminate cement to mitigate the alkali silica reaction in mortars | Kleib, Joelle; Aouad, Georges ; Louis, Ghislain; Zakhour, Mirvat; Boulos, Madona; Rousselet, Angelique; Bulteel, David |
| 2020 | The use of calcium sulfo-aluminate cement as an alternative to Portland Cement for the recycling of municipal solid waste incineration bottom ash in mortar | Antoun, Marc; Becquart, Frédéric; Gerges, Najib N. ; Aouad, Georges |
| 2013 | Use of analog models to simulate flow recession of karstic springs | Saba, Marianne ; Carlier, Eric; Gerges, Najib N. |
| 2018 | Uncertainty quantification for structural health monitoring applications | Nasr, Dana ; Slika, Wael G.; Saad, George A. |
| 2014 | Ultimate response of stainless steel continuous beams | Theofanous, M.; Saliba, Najib G. ; Zhao, O; Gardner, Leroy |
| 2020 | The typological classification of the old lebanese churches in Koura, Batroun and Byblos, from the 8th Century to the 13th Century | Issa, Ghassan A. |
| 2019 | Thixotropy and interfacial bond strengths of polymer-modified printed mortars | Sakka, Fatima El; Assaad, Joseph ; Hamzeh, Farook R.; Nakhoul, Charbel |
| 2001 | Tests on slender reinforced concrete columns | Khalil, Nariman ; Cusens, Anthony R.; Parker, M.D |
| 2018 | Testing and modeling the behavior of sandwich lightweight panels against wind and seismic loads | Assaad, Joseph ; Chakar, Elie; Zéhil, Gérard-Philippe |
Collection's Items (Sorted by Submit Date in Descending order): 161 to 180 of 425
