Georges Awwad.png picture
Full Name
Aouad, Georges
Title
Associate Professor
Category
Full time faculty
 
 
 
 
UOB Author ID
A02689
 
Campus
Koura
 
UOB join date
01-09-2016
 
End Date
31-10-2022
 
Office
EC 215
 
Phone Extension
5827
 

Refined By:
Type:  Journal Article

Results 1-19 of 19 (Search time: 0.0 seconds).

Issue DateTitleAuthor(s)
12017Use of calcium sulfoaluminate cements for setting control of 3D-printing mortarsKhalil, Noura; Aouad, Georges ; Cheikh, Khadija El; Rémonda, Sébastien
22018The use of calcium sulfoaluminate cement to mitigate the alkali silica reaction in mortarsKleib, Joelle; Aouad, Georges ; Louis, Ghislain; Zakhour, Mirvat; Boulos, Madona; Rousselet, Angelique; Bulteel, David
32019Risk assessment of asbestos-cement roof sheets in Chekka, North LebanonKfoury, Adib ; Mitri, George ; Zakhem, Henri El ; Aouad, Georges 
47-Sep-2022Recycling of Flash-Calcined Dredged Sediment for Concrete 3D PrintingDaher, Jana; Kleib, Joelle; Benzerzour, Mahfoud; Abriak, Nor Edine; Aouad, Georges 
52021Production of Portland cement clinker from French Municipal Solid Waste Incineration Bottom AshKleib, Joelle; Aouad, Georges ; Abriak, Nor Edine; Benzerzour, Mahfoud
617-Apr-2023Photocatalytic Activity and Mechanical Properties of Cement Slurries Containing Titanium DioxideJabali, Yasmine ; Assaad, Joseph ; Aouad, Georges 
72017Numerical and experimental studies of aggregate blocking in mortar extrusionCheikh, Khadija El; Rémonda, Sébastien; Khalil, Noura; Aouad, Georges 
82020Mechanical assessment of concrete - Steel bonding in 3D printed elementsBaz, Bilal Adnan; Aouad, Georges ; Leblond, Philippe; Mansouri, Omar Al-; D'hondt, Melody; Rémonda, Sébastien
918-Jun-2023Long-term durability assessment of 3D printed concreteEl Inaty, François; Baz, Bilal; Aouad, Georges 
102013Leaching of calcium sulfoaluminate cement pastes by water at regulated pH and temperature: experimental investigation and modelingBerger, Stephane; Aouad, Georges ; Cau Dit Coumesa, C; Le Bescop, Patrick; Damidot, Denis
112021Inter-layer reinforcement of 3D printed concrete elementsBaz, Bilal; Aouad, Georges ; Khalil, Noura; Remond, Sébastien
126-Mar-2022Influence of the mix composition on the thixotropy of 3D printable mortarsAouad, Georges 
132021Incorporation of zinc in calcium sulfoaluminate cement clinkerAouad, Georges 
142022Experimental study of bulletproof concreteTawk, Issam ; Semaani, Eddy; Aouad, Georges 
152018Evaluate the influence of starch on earth/hemp or flax straws mixtures properties in presence of superplasticizerAlhaik, Ghaith; Dubois, Vincent; Wirquin, Eric; Leblanc, Alexandre; Aouad, Georges 
162017Enhance the rheological and mechanical properties of clayey materials by adding starchesAlhaik, Ghaith; Ferreira, Michel; Dubois, Vincent; Wirquin, Eric; Tilloy, Sébastien; Monflier, Eric; Aouad, Georges 
172020Effect of the printing method and mortar's workability on pull-out strength of 3D printed elementsBaz, Bilal Adnan; Aouad, Georges ; Rémonda, Sébastien
182021Effect of calcium sulfoaluminate cements composition on their durabilityKleib, Joelle; Aouad, Georges ; Benzerzour, Mahfoud; Zakhour, Mirvat; Abriak, Nor Edine
192021Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environmentsBaz, Bilal; Aouad, Georges ; Kleib, Joelle; Bulteel, David; Remond, Sébastien