1. UOBScholar Hub

Aouad, Georges

Network Lab View Statistics Email Alert RSS Feed

General

Georges Awwad.png picture
Full Name
Aouad, Georges
Title
Associate Professor
Category
Full time faculty
 
Department
 
Faculty
 
UOB Email
 
UOB Author ID
A02689
 
Campus
Koura
 
UOB join date
01-09-2016
 
End Date
31-10-2022
 
Office
EC 215
 
Phone Extension
5827
 

Publications

Refined By:
Type:  Journal Article
Author:  Aouad, Georges

Results 1-20 of 20 (Search time: 0.0 seconds).

Issue DateTitleAuthor(s)
12017Use of calcium sulfoaluminate cements for setting control of 3D-printing mortarsKhalil, Noura; Aouad, Georges ; Cheikh, Khadija El; Rémonda, Sébastien
22020The use of calcium sulfo-aluminate cement as an alternative to Portland Cement for the recycling of municipal solid waste incineration bottom ash in mortarAntoun, Marc; Becquart, Frédéric; Gerges, Najib N. ; Aouad, Georges 
32021Sustainable masonry blocks: Olive wood waste as substitute for fine aggregatesAntoun, Marc; Issa, Camille A.; Aouad, Georges ; Gerges, Najib N. 
42019Risk assessment of asbestos-cement roof sheets in Chekka, North LebanonKfoury, Adib ; Mitri, George ; Zakhem, Henri El ; Aouad, Georges 
57-Sep-2022Recycling of Flash-Calcined Dredged Sediment for Concrete 3D PrintingDaher, Jana; Kleib, Joelle; Benzerzour, Mahfoud; Abriak, Nor Edine; Aouad, Georges 
62021Production of Portland cement clinker from French Municipal Solid Waste Incineration Bottom AshKleib, Joelle; Aouad, Georges ; Abriak, Nor Edine; Benzerzour, Mahfoud
717-Apr-2023Photocatalytic Activity and Mechanical Properties of Cement Slurries Containing Titanium DioxideJabali, Yasmine ; Assaad, Joseph ; Aouad, Georges 
82017Numerical and experimental studies of aggregate blocking in mortar extrusionCheikh, Khadija El; Rémonda, Sébastien; Khalil, Noura; Aouad, Georges 
92020Mechanical assessment of concrete - Steel bonding in 3D printed elementsBaz, Bilal Adnan; Aouad, Georges ; Leblond, Philippe; Mansouri, Omar Al-; D'hondt, Melody; Rémonda, Sébastien
1018-Jun-2023Long-term durability assessment of 3D printed concreteEl Inaty, François; Baz, Bilal; Aouad, Georges 
112013Leaching of calcium sulfoaluminate cement pastes by water at regulated pH and temperature: experimental investigation and modelingBerger, Stephane; Aouad, Georges ; Cau Dit Coumesa, C; Le Bescop, Patrick; Damidot, Denis
122021Inter-layer reinforcement of 3D printed concrete elementsBaz, Bilal; Aouad, Georges ; Khalil, Noura; Remond, Sébastien
136-Mar-2022Influence of the mix composition on the thixotropy of 3D printable mortarsAouad, Georges 
142021Incorporation of zinc in calcium sulfoaluminate cement clinkerAouad, Georges 
152022Experimental study of bulletproof concreteTawk, Issam ; Semaani, Eddy; Aouad, Georges 
162018Evaluate the influence of starch on earth/hemp or flax straws mixtures properties in presence of superplasticizerAlhaik, Ghaith; Dubois, Vincent; Wirquin, Eric; Leblanc, Alexandre; Aouad, Georges 
172017Enhance the rheological and mechanical properties of clayey materials by adding starchesAlhaik, Ghaith; Ferreira, Michel; Dubois, Vincent; Wirquin, Eric; Tilloy, Sébastien; Monflier, Eric; Aouad, Georges 
182020Effect of the printing method and mortar's workability on pull-out strength of 3D printed elementsBaz, Bilal Adnan; Aouad, Georges ; Rémonda, Sébastien
192021Effect of calcium sulfoaluminate cements composition on their durabilityKleib, Joelle; Aouad, Georges ; Benzerzour, Mahfoud; Zakhour, Mirvat; Abriak, Nor Edine
202021Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environmentsBaz, Bilal; Aouad, Georges ; Kleib, Joelle; Bulteel, David; Remond, Sébastien