Tony Gerges.png picture
Full Name
Gergess, Antoine
Title
Professor
Category
Full time faculty
 
 
 
 
UOB Author ID
A0213
 
Campus
Koura
 
UOB join date
17-02-1999
 
End Date
31-08-2023
 
Office
EC 214
 
Phone Extension
5826
 

Results 1-20 of 27 (Search time: 0.0 seconds).

Issue DateTitleAuthor(s)
12019Analysis of bonded link-slabs in precast, prestressed girder bridgesGergess, Antoine 
22015Assessment of residual stresses due to cold bending structural steel girders using finite element modelingTawk, Issam ; Rishmany, Jihad ; Gergess, Antoine 
32008Cambering structural steel I-girders using cold bendingGergess, Antoine ; Sen, Rajan
42009Cold bending HPS 485W steel bridge girdersGergess, Antoine ; Sen, Rajan
52008Cold curving steel bridge girdersGergess, Antoine ; Sen, Rajan
62004Cold curving symmetric unstiffened I-girdersGergess, Antoine ; Sen, Rajan
72016Curving structural steel girders by two-point bendingGergess, Antoine ; Sen, Rajan
82013Design implications of increased live loads on continuous precast, prestressed concrete girder bridges with Solid EndsGergess, Antoine ; Sen, Rajan
92020Effect of quality of recycled aggregates on bond strength between concrete and embedded steel reinforcementAssaad, Joseph ; Matar, Pierre; Gergess, Antoine 
102020Effects of elastomeric bearing stiffness on the structural behavior of bonded link-slabsGergess, Antoine ; Douaihy, Elie Zakhia
112004Fabrication aids for cold straightening I-girdersGergess, Antoine ; Sen, Rajan
122005Fabrication of unsymmetrical curved plate girders by cold bendingGergess, Antoine ; Sen, Rajan
132021Finite Element Modeling of Cold Curved Steel Rolled Beams Under Service LoadsSaliba, Najib G. ; Nehmeh, Dola F.; Helal, Antoine H.; Gergess, Antoine 
142018Finite element modeling of rolled steel shapes subjected to weak axis bendingSaliba, Najib G. ; Tawk, Issam ; Gergess, Antoine 
152018Finite element modelling of a cold curved steel plate girderRishmany, Jihad ; Tawk, Issam ; Gergess, Antoine 
162003Finite-element modeling of heat-curved I-girdersSen, Rajan; Gergess, Antoine ; Issa, Camille
172007Full-scale cold bending demonstration testGergess, Antoine ; Sen, Rajan
182014Impact of using higher strength concrete on the design of prestressed concrete bridgesGergess, Antoine ; Sen, Rajan
192012Implication of increased live loads on the design of precast concrete bridge girdersGerges, Najib N. ; Gergess, Antoine 
202014Inelastic response of wide flange steel beams curved by symmetrical weak axis bending using two-point loadsGergess, Antoine ; Sen, Rajan