1. UOBScholar Hub

Department of Mechanical Engineering

View Statistics Email Alert RSS Feed

Card

Organization name
Department of Mechanical Engineering
Parent OrgUnit

OrgUnit's Researchers publications
(Dept/Workgroup Publication)

Refined By:
Date Issued:  [2010 TO 2019]
Type:  Journal Article

Results 1-20 of 56 (Search time: 0.0 seconds).

Issue DateTitleAuthor(s)
12013Analysis of fluorinated interactions in plain ZDDP and fully formulated oils using design of experiment (DOE) and chemistry characterization of tribofilms in boundary lubrication under extreme loading conditionsNehme, Gabi 
22015Assessment of residual stresses due to cold bending structural steel girders using finite element modelingTawk, Issam ; Rishmany, Jihad ; Gergess, Antoine 
32010Composite delamination modelling using a multi-layered solid elementTawk, Issam ; Navarro, Pablo; Ferrero, Jean-Francois; Barrau, Jean-Jacques; Abdullah, E
42016A computational study of heat transfer due to the inlet oscillating conditions in A 2-D jet impinging on an isothermal surface at a fixed reynolds numberIssa, Johnny; Saliba, Najib G. ; Sidnawi, Bchara
52015A computational study of heat transfer in a laminar oscillating confined slot jet impinging on an isothermal surface at low Reynolds numbersIssa, Johnny; Sidnawi, Bchara; Saliba, Najib G. 
62019A correspondence between compressible and incompressible plane elastostaticsHonein, Tanios; Honein, Elie ; Najjar, Michel; Rai, Habib 
72013Cross-section stability of lean duplex stainless steel welded I-sectionsSaliba, Najib G. ; Gardner, Leroy
82018Deformation-based design of stainless steel cross-sections in shearSaliba, Najib G. ; Gardner, Leroy
92010Effect of contact load and lubricant volume on the properties of tribofilms formed under boundary lubrication in a fully formulated oil under extreme load conditionsNehme, Gabi ; Mourhatch, Ramoun; Aswath, Pranesh B.
102013The effect of cyclic speed on the wear properties of molybdenum disulfide greases under extreme pressure loading using 4 balls wear testsNehme, Gabi 
112011Effect of extreme contact load under two different rotational speeds on reduced phosphorus plain ZDDP oil in the presence of 1per cent FeF3 catalystNehme, Gabi 
122012Effect of extreme load on plain ZDDP oil in the presence of FeF3 catalyst using design of experiment and fundamental study under two different rotational speedsNehme, Gabi 
132012The effect of FeF3/TiF3 catalysts on the thermal and tribological performance of plain oil ZDDP under extreme pressure loadingNehme, Gabi 
142018Electroconvective cavity flow patterns created by asymmetric electrode configurationLouste, Christophe; Romat, Hubert; Traore, Philippe; Daaboul, Michel ; Vazquez, Pedro; Sosa, Roberto
152016Engineering graduates' skill sets in the MENA region: a gap analysis of industry expectations and satisfactionRamadi, Eric; Ramadi, Serge; Nasr, Karim 
162019Experimental and numerical study of the damage mechanisms in hybrid unidirectional/woven composites under impact loadingMahmoud, Bassam; Manseri, L.; Rogani, A.; Navarro, Pablo; Marguet, Steven; Ferrero, Jean-Francois; Tawk, Issam 
172013Experimental study of the shear response of lean duplex stainless steel plate girdersSaliba, Najib G. ; Gardner, Leroy
182018Finite element modeling of rolled steel shapes subjected to weak axis bendingSaliba, Najib G. ; Tawk, Issam ; Gergess, Antoine 
192018Finite element modelling of a cold curved steel plate girderRishmany, Jihad ; Tawk, Issam ; Gergess, Antoine 
202011Fluorinated FeF3 catalyst interactions in three different oil formulations using design of experiment optimization and chemistry characterization of tribofilmsNehme, Gabi