Please use this identifier to cite or link to this item: https://scholarhub.balamand.edu.lb/handle/uob/1896
DC FieldValueLanguage
dc.contributor.authorNehme, Gabien_US
dc.date.accessioned2020-12-23T09:02:26Z-
dc.date.available2020-12-23T09:02:26Z-
dc.date.issued2011-
dc.identifier.urihttps://scholarhub.balamand.edu.lb/handle/uob/1896-
dc.description.abstractFriction and wear performance of FeF3 catalyst in plain and fully formulated oils is pursued in two areas. First, it explores the tribological testing and interactions of several oil blends and provides equations for the fully formulated and plain zinc dialkyl dithiophosphate (ZDDP) oil using design of experiment (DOE) under steady-state rotational speed of 700 r/min (the test was run under 700 r/min until it reaches 100 000 revolutions or failure, whichever comes first) and extreme contact load of 2.72 GPa. Second, lower phosphorus plain ZDDP oil was targeted with the addition of 1 per cent FeF3 catalyst since the DOE responses and equations provided significant evidence that FeF3 catalyst improved the wear performance and extended the failure time in plain ZDDP oils. Scanning electron microscopy coupled with energy dispersive spectroscopy, transmission electron microscopy, and Auger electron spectroscopy were used to study the wear track, wear debris, and tribofilm formation of 0.1 per cent P (phosphorus) plain ZDDP oil + 1 per cent FeF3 catalyst and 0.05 per cent P (phosphorus) plain ZDDP oil + 1 per cent FeF3 catalyst under two different rotational speeds (lower stage of 100 r/min for the first 5000 revolutions and a higher stage of 700 r/min until failure or 100 000 revolutions, whichever comes first) and extreme Hertzian contact pressure of 2.77 GPa or 405 N. Results show a significant improvement when 1 per cent FeF3 catalyst is used in 0.05 per cent P plain ZDDP oil and it correlates closely with the experimental results of the DOE.en_US
dc.format.extent11 p.en_US
dc.language.isoengen_US
dc.subjectBoundary lubricationen_US
dc.subjectFrictionen_US
dc.subjectWearen_US
dc.subjectSEMen_US
dc.subjectEDSen_US
dc.subjectAESen_US
dc.subjectTEMen_US
dc.titleEffect of extreme contact load under two different rotational speeds on reduced phosphorus plain ZDDP oil in the presence of 1per cent FeF3 catalysten_US
dc.typeJournal Articleen_US
dc.contributor.affiliationDepartment of Mechanical Engineeringen_US
dc.description.volume225en_US
dc.description.issue8en_US
dc.description.startpage833en_US
dc.description.endpage844en_US
dc.date.catalogued2019-04-08-
dc.description.statusPublisheden_US
dc.identifier.OlibID191195-
dc.relation.ispartoftextJournal of engineering tribologyen_US
dc.provenance.recordsourceOliben_US
crisitem.author.parentorgFaculty of Engineering-
Appears in Collections:Department of Mechanical Engineering
Show simple item record

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.