1. UOBScholar Hub

Department of Mechanical Engineering

View Statistics Email Alert RSS Feed

Card

Organization name
Department of Mechanical Engineering
Parent OrgUnit

OrgUnit's Researchers publications
(Dept/Workgroup Publication)

Refined By:
Date Issued:  [2010 TO 2019]

Results 1-20 of 108 (Search time: 0.0 seconds).

Issue DateTitleAuthor(s)
12010Analysis of 100 and 700 rpm Cycles in Boundary Lubrication Using Fluorinated Mix Interactions Under Extreme Boundary LubricationNehme, Gabi 
22013Analysis of fluorinated interactions in plain ZDDP and fully formulated oils using design of experiment (DOE) and chemistry characterization of tribofilms in boundary lubrication under extreme loading conditionsNehme, Gabi 
32015The antiwear performance of molybdenum disulfide greases using 4 balls wear tests under extreme pressure and optimized loading at different rotational speeds{09}Nehme, Gabi 
42015Assessment of residual stresses due to cold bending structural steel girders using finite element modelingTawk, Issam ; Rishmany, Jihad ; Gergess, Antoine 
52012Behavior and design of lean duplex stainless steel plate girders loaded in shearSaliba, Najib G. ; Gardner, Leroy
62010Composite delamination modelling using a multi-layered solid elementTawk, Issam ; Navarro, Pablo; Ferrero, Jean-Francois; Barrau, Jean-Jacques; Abdullah, E
72016A computational study of heat transfer due to the inlet oscillating conditions in A 2-D jet impinging on an isothermal surface at a fixed reynolds numberIssa, Johnny; Saliba, Najib G. ; Sidnawi, Bchara
82015A computational study of heat transfer in a laminar oscillating confined slot jet impinging on an isothermal surface at low Reynolds numbersIssa, Johnny; Sidnawi, Bchara; Saliba, Najib G. 
92019A correspondence between compressible and incompressible plane elastostaticsHonein, Tanios; Honein, Elie ; Najjar, Michel; Rai, Habib 
102013Cross-section stability of lean duplex stainless steel welded I-sectionsSaliba, Najib G. ; Gardner, Leroy
112018Deformation-based design of stainless steel cross-sections in shearSaliba, Najib G. ; Gardner, Leroy
122011Design of experiment analysis of plain ZDDP oil in the presence of FeF3 using two different rotational speeds and extreme contact loadNehme, Gabi 
132013Deviation and atomization of a dielectric liquid sheet under electrohydrodynamic excitationDaaboul, Michel ; Louste, Christophe; Traore, Philippe
142010Effect of contact load and lubricant volume on the properties of tribofilms formed under boundary lubrication in a fully formulated oil under extreme load conditionsNehme, Gabi ; Mourhatch, Ramoun; Aswath, Pranesh B.
152013The effect of cyclic speed on the wear properties of molybdenum disulfide greases under extreme pressure loading using 4 balls wear testsNehme, Gabi 
162011Effect of extreme contact load under two different rotational speeds on reduced phosphorus plain ZDDP oil in the presence of 1per cent FeF3 catalystNehme, Gabi 
172012Effect of extreme load on plain ZDDP oil in the presence of FeF3 catalyst using design of experiment and fundamental study under two different rotational speedsNehme, Gabi 
182012The effect of FeF3/TiF3 catalysts on the thermal and tribological performance of plain oil ZDDP under extreme pressure loadingNehme, Gabi 
192011The effect of pressure relief in prosthetic sockets on the wear and comfort of BK amputeesNehme, Gabi ; Semaan, Raymond; Oueini, Ramzi
202016Effet des particules d'ensemencement sur les mesures de vélocimétrie par images de particules en electrohydrodynamiqueDaaboul, Michel ; Louste, Christophe; Traore, Philippe