Please use this identifier to cite or link to this item: https://scholarhub.balamand.edu.lb/handle/uob/548
DC FieldValueLanguage
dc.contributor.authorIssa, Johnnyen_US
dc.contributor.authorOrtega, Alfonsoen_US
dc.date.accessioned2020-12-23T08:32:15Z-
dc.date.available2020-12-23T08:32:15Z-
dc.date.issued2015-
dc.identifier.urihttps://scholarhub.balamand.edu.lb/handle/uob/548-
dc.description.abstractThe effect of the exit wall jet flow excitation on the flow and thermal behaviors of the turbulent wall jet is experimentally investigated. Various forcing amplitudes and frequencies are used in the presence and absence of a free stream flow. Forcing the flow showed to have a major impact on the fluid mechanics of the turbulent wall jet which was clearly shown in the velocity fields and the associated time-averaged quantities such as the wall jet spread and the maximum velocity decay. The normal direction at which the local maximum velocity occurs, also known as the wall jet spreading, is shown to move further away from the wall and is increased by more than 20% under some forcing conditions. The local maximum velocity decay with the downstream direction is reduced by more than 2.5% at further downstream locations. At a given location, the increase in the wall jet spreading together with the reduction in the mean velocity results in a decrease in the wall skin friction calculated using the slope of the mean velocity in the viscous sublayer, a behavior consistent with the literature. Due to its importance in enhancing heat transfer phenomena, the effect of the forcing on the streamwise velocity fluctuations is also investigated under the various forcing conditions. The profiles of the fluctuating component of the velocity, u, are measured at various downstream locations since they are essential in understanding the growth of the disturbances. Forcing the wall jet increased u in the inner and outer regions and revealed the two peaks corresponding to the inner and outer shear layers respectively. This phenomenon is attributed to the added disturbance at the jet exit in addition to the disturbance growth with the downstream direction. The introduction of wall jet flow forcing at various amplitudes and frequencies showed a significant effect on the thermal behavior of the wall jet and was more pronounced in the absence of a free stream flow, a fact related to the evolu.en_US
dc.language.isoengen_US
dc.publisherASMEen_US
dc.titleAn experimental study of the forcing effect on the flow and heat transfer in a turbulent wall jeten_US
dc.typeConference Paperen_US
dc.relation.conferenceASME International Mechanical Engineering Congress and Exposition (IMECE) (13-19 November, 2015 : Houston, Texas, USA)en_US
dc.contributor.affiliationDepartment of Mechanical Engineeringen_US
dc.date.catalogued2018-02-12-
dc.description.statusPublisheden_US
dc.identifier.OlibID177626-
dc.relation.ispartoftextHeat Transfer and Thermal Engineeringen_US
dc.provenance.recordsourceOliben_US
Appears in Collections:Department of Mechanical Engineering
Show simple item record

Record view(s)

72
checked on Nov 23, 2024

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.