Please use this identifier to cite or link to this item: https://scholarhub.balamand.edu.lb/handle/uob/1981
DC FieldValueLanguage
dc.contributor.authorSaliba, Najib G.en_US
dc.contributor.authorGardner, Leroyen_US
dc.date.accessioned2020-12-23T09:04:12Z-
dc.date.available2020-12-23T09:04:12Z-
dc.date.issued2013-
dc.identifier.urihttps://scholarhub.balamand.edu.lb/handle/uob/1981-
dc.description.abstractAn experimental and numerical study of the shear response of lean duplex stainless steel plate girders is described in this paper. A total of nine welded plate girders were tested. Lean duplex stainless steel, which is a low nickel variety of the material, has approximately twice the strength of the common austenitic grades and at approximately half the initial cost. It also possesses good corrosion resistance and high temperature properties, as well as adequate weldability and fracture toughness. Two web panel aspect ratios and a range of web slendernesses were considered. The results from the experiments, including the full load-deformation histories and failure models are reported. A numerical investigation was carried out in parallel with the testing. The models were first validated against the experimental results after which parametric studies were performed to generate data for a wider range of cross-sections. The generated experimental and numerical data were used to assess the shear resistance design equations given in Eurocode 3: Part 1.4. The current design provisions were shown to be safely applicable to lean duplex stainless steel, though improved guidance is sought in further ongoing research.en_US
dc.format.extent16 p.en_US
dc.language.isoengen_US
dc.subjectExperimentsen_US
dc.subjectFailure modesen_US
dc.subjectFinite elementen_US
dc.subjectLean duplexen_US
dc.subjectNumerical modellingen_US
dc.subjectShear bucklingen_US
dc.subjectStructural testingen_US
dc.subjectUltimate shear capacityen_US
dc.subjectWelded I-sectionsen_US
dc.subject.lcshStainless steelen_US
dc.titleExperimental study of the shear response of lean duplex stainless steel plate girdersen_US
dc.typeJournal Articleen_US
dc.contributor.affiliationDepartment of Civil and Environmental Engineeringen_US
dc.description.volume46en_US
dc.description.startpage375en_US
dc.description.endpage391en_US
dc.date.catalogued2017-12-01-
dc.description.statusPublisheden_US
dc.identifier.ezproxyURLhttp://ezsecureaccess.balamand.edu.lb/login?url=https://www.sciencedirect.com/science/article/pii/S0141029612004014en_US
dc.identifier.OlibID175334-
dc.relation.ispartoftextJournal of engineering structuresen_US
dc.provenance.recordsourceOliben_US
crisitem.author.parentorgFaculty of Engineering-
Appears in Collections:Department of Civil and Environmental Engineering
Show simple item record

Record view(s)

1
checked on Dec 4, 2021

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.