1. UOBScholar Hub

Department of Mechanical Engineering

View Statistics Email Alert RSS Feed

Card

Organization name
Department of Mechanical Engineering
Parent OrgUnit

OrgUnit's Researchers publications
(Dept/Workgroup Publication)

Refined By:
Author:  Tawk, Issam

Results 1-20 of 23 (Search time: 0.0 seconds).

Issue DateTitleAuthor(s)
12015Assessment of residual stresses due to cold bending structural steel girders using finite element modelingTawk, Issam ; Rishmany, Jihad ; Gergess, Antoine 
22007Composite damage and delamination modelling using a specific multi-layered element in transient analysisMouillet, J.-B; Tawk, Issam ; Ferrero, Jean-Francois; Barrau, Jean-Jacques
32010Composite delamination modelling using a multi-layered solid elementTawk, Issam ; Navarro, Pablo; Ferrero, Jean-Francois; Barrau, Jean-Jacques; Abdullah, E
42007Développement d'un élément fini pour la modélisation du délaminage dans les structures compositesTawk, Issam ; Ferrero, Jean-Francois; Barrau, Jean-Jacques; Mouillet, J.-B
51-Jan-2023Dynamic response of epoxy foam structures reinforced with aramid layers subjected to low-velocity impactBoutros, Lara; Navarro, Pablo; Marguet, Steven; Tawk, Issam ; Ferrero, J. F.
62009Etude de l'impact sur pale d'hélicoptèreTawk, Issam ; Ferrero, Jean-Francois; Barrau, Jean-Jacques; Navarro, Pablo; Lemaire, S
72013Experimental and numerical study of normal and oblique impacts on helicopter bladesAubry, J; Navarro, Pablo; Tawk, Issam ; Marguet, Steven; Ferrero, Jean-Francois; Lemaire, S; Rauch, P
82019Experimental and numerical study of the damage mechanisms in hybrid unidirectional/woven composites under impact loadingMahmoud, Bassam; Manseri, L.; Rogani, A.; Navarro, Pablo; Marguet, Steven; Ferrero, Jean-Francois; Tawk, Issam 
92022Experimental study of bulletproof concreteTawk, Issam ; Semaani, Eddy; Aouad, Georges 
102016Experimental study of the interlaminar fracture of composite materials in mode IIITawk, Issam ; Rishmany, Jihad ; Saba, Nicolas ; Mahmoud, Bassam
112020Experimental study of the interlaminar fracture of composite materials in mode III by MSCB testTawk, Issam ; Rishmany, Jihad ; Saba, Nicolas ; Navarro, Pablo; Ferrero, Jean-Francois
122012Étude numérique de linfluence de la vitesse dimpact sur la résistance des pales dhélicoptères à des impacts rasantsAubry, J; Navarro, P.; Marguet, Steven; Ferrero, Jean-Francois; Tawk, Issam ; Lemaire, S; Rauch, P
132015FEM analysis of a tailored b-pillar using composite materialsSaba, Nicolas ; Rishmany, Jihad ; Tawk, Issam 
142018Finite element modeling of rolled steel shapes subjected to weak axis bendingSaliba, Najib G. ; Tawk, Issam ; Gergess, Antoine 
152018Finite element modelling of a cold curved steel plate girderRishmany, Jihad ; Tawk, Issam ; Gergess, Antoine 
162018Investigation and modification of the tailoring method in the press hardening processes using coupled thermo-mechanical simulationSaba, Nicolas ; Rishmany, Jihad ; Daaboul, Michel ; Tawk, Issam 
172014Investigation on solar-powered turbines using refrigerant R-134aRishmany, Jihad ; Daaboul, Michel ; Tawk, Issam ; Saba, Nicolas 
182010A multilayered solid element used to model composite delaminationTawk, Issam ; Ferrero, Jean-Francois; Barrau, Jean-Jacques; Abdullah, E; Sudre, M
192017Optimization of a typical BIW component using tailor welding technique via FEASaba, Nicolas ; Rishmany, Jihad ; Daaboul, Michel ; Tawk, Issam 
202017Optimization of a vertical axis wind turbine using FEA, multibody dynamics and wind tunnel testingRishmany, Jihad ; Daaboul, Michel ; Tawk, Issam ; Saba, Nicolas