Department of Mechanical Engineering

Organization name
Department of Mechanical Engineering
Parent OrgUnit

OrgUnit's Researchers publications
(Dept/Workgroup Publication)

Results 1-20 of 171 (Search time: 0.0 seconds).

Issue DateTitleAuthor(s)
12014An alternative approach for student counseling at university level: an empirical experience from UOBJadayel, Roula; Iaaly, Amal 
22010Analysis of 100 and 700 rpm Cycles in Boundary Lubrication Using Fluorinated Mix Interactions Under Extreme Boundary LubricationNehme, Gabi 
32013Analysis of fluorinated interactions in plain ZDDP and fully formulated oils using design of experiment (DOE) and chemistry characterization of tribofilms in boundary lubrication under extreme loading conditionsNehme, Gabi 
42016Analysis of polycyclic aromatic hydrocarbons (PAHs) in lebanese surficial sediments: a focus on the regions of Tripoli, Jounieh, Dora, and TyreManneh, Rima ; Abi Ghanem, Carine; Khalaf, Gaby; Najjar, Elie; Khoury, Bilal El ; Iaaly, Amal ; Zakhem, Henri El 
52015The antiwear performance of molybdenum disulfide greases using 4 balls wear tests under extreme pressure and optimized loading at different rotational speeds{09}Nehme, Gabi 
62013Assessing groundwater quality in a coastal area using the GIS techniqueHoz, Mervat El; Mohsen, Abir; Iaaly, Amal 
72016Assessing water quality using GIS: the case of northern Lebanon miocene aquiferSaba, Marianne ; Iaaly, Amal ; Carlier, Eric; Gerges, Najib N. 
82015Assessment of residual stresses due to cold bending structural steel girders using finite element modelingTawk, Issam ; Rishmany, Jihad ; Gergess, Antoine 
928-Jan-2022Assessment of Seawater Intrusion in a Coastline City Using GIS (Tripoli Lebanon)Saba, Marianne ; Iaaly, Amal ; Gerges, Najib N. 
102012Behavior and design of lean duplex stainless steel plate girders loaded in shearSaliba, Najib G. ; Gardner, Leroy
11Oct-2020Case Study: Assessment of the Hydrophysical and Hydrochemical Parameters in the Groundwater of the North Lebanese Miocene AquiferSaba, Marianne ; Iaaly, Amal 
122015A comparative analysis: the impact of awareness campaigns on students concerns at university levelJadayel, Roula; Iaaly, Amal ; Tawk, Florence; Adra, Mariam
132007Composite damage and delamination modelling using a specific multi-layered element in transient analysisMouillet, J.-B; Tawk, Issam ; Ferrero, Jean-Francois; Barrau, Jean-Jacques
142010Composite delamination modelling using a multi-layered solid elementTawk, Issam ; Navarro, Pablo; Ferrero, Jean-Francois; Barrau, Jean-Jacques; Abdullah, E
15Jun-2023Computational fluid dynamics investigations over conventional and modified Savonius wind turbinesRizk, Maysa'a; Nasr, Karim 
162016A computational study of heat transfer due to the inlet oscillating conditions in A 2-D jet impinging on an isothermal surface at a fixed reynolds numberIssa, Johnny; Saliba, Najib G. ; Sidnawi, Bchara
172015A computational study of heat transfer in a laminar oscillating confined slot jet impinging on an isothermal surface at low Reynolds numbersIssa, Johnny; Sidnawi, Bchara; Saliba, Najib G. 
182019A correspondence between compressible and incompressible plane elastostaticsHonein, Tanios; Honein, Elie ; Najjar, Michel; Rai, Habib 
192013Cross-section stability of lean duplex stainless steel welded I-sectionsSaliba, Najib G. ; Gardner, Leroy
202018Deformation-based design of stainless steel cross-sections in shearSaliba, Najib G. ; Gardner, Leroy