Organization name
Faculty of Engineering

OrgUnit's Researchers publications
(Dept/Workgroup Publication)

Results 21-40 of 99 (Search time: 0.0 seconds).

Issue DateTitleAuthor(s)
212020Comprehensive study on the effect of magnesium loading over nickel-ordered mesoporous alumina for dry reforming of methaneKaram, Leila; Armandi, Marco; Casale, Sandra; Khoury, Vanessa El; Bonelli, Barbara; Massiani, Pascale; Hassan, Nissrine El 
222015Computation of stresses and strains in heat-curved steel girders using the duhamel analogyGergess, Antoine ; Sen, Rajan
232007Curving Steel Bridge Girders by Cold BendingGergess, Antoine ; Sen, Rajan
242016Curving structural steel girders by two-point bendingGergess, Antoine ; Sen, Rajan
252013Design implications of increased live loads on continuous precast, prestressed concrete girder bridges with Solid EndsGergess, Antoine ; Sen, Rajan
262012Discovery of high oxygen storage capacity of Ce/SBA-15 nanomaterials prepared under controlled conditionsHassan, Nissrine El ; Bachawati, Makram El ; Casale, Sandra; Samrani , A. El; Zakhem, Henri El 
272013Dry reforming of methane at medium-temperature on highly dispersed Ni/SBA-15 and Ni-Ce/SBA-15 catalysts prepared by a "two solvents" methodKaydouh, Marie-Nour; Hassan, Nissrine El ; Zakhem, Henri El ; Casale, Sandra; Davidson, Anne; Massiani, Pascale
82013Dry reforming of methane on Co, Ru and Co-Ru dispersed on SBA-15 catalystsJabbour, Karam ; Hassan, Nissrine El ; Estephane, Jane ; Zakhem, Henri El 
928-Nov-2022Effect of Impregnation with Ammonia vs Silica Support Textural Properties on Ni Nanoparticle Catalysts for Dry Reforming of MethaneDaoura, Oscar; Hassan, Nissrine El ; Boutros, Maya; Casale, Sandra; Massiani, Pascale; Launay, Franck
102018Effect of pore geometry of mesoporous supports on catalytic performances in methane reformingTannous, Joy; Karam, Leila; Kaydouh, Marie-Nour; Zakhem, Henri El ; Hassan, Nissrine El ; Casale, Sandra
112020Effect of quality of recycled aggregates on bond strength between concrete and embedded steel reinforcementAssaad, Joseph ; Matar, Pierre; Gergess, Antoine 
122013Effect of ruthenium promotion of Co SBA 15 catalysts on the reactivity in oxidation of propene and carbon blackJabbour, Karam ; Hassan, Nissrine El ; Aouad, Samer ; Casale, Sandra; Khoury, Bilal El ; Zakhem, Henri El ; Nakat, Hanna El 
132015Effect of the order of Ni and Ce addition in SBA-15 on the activity in dry reforming of methaneKaydouh, Marie-Nour; Hassan, Nissrine El ; Davidson, Anne; Casale, Sandra; Zakhem, Henri El ; Massiani, Pascale
142020Effects of elastomeric bearing stiffness on the structural behavior of bonded link-slabsGergess, Antoine ; Douaihy, Elie Zakhia
152014Effet de la taille des nanoparticules de nickel dispersées sur zéolite NaY dans le reformage catalytique du méthane par le CO2Estephane, Jane ; Hassan, Nissrine El ; Safieh, Khaled; Casale, Sandra; Ayoub, Marc; Zakhem, Henri El 
162014Effet promoteur du rhodium sur l'activité et la stabilité des catalyseurs Co SBA 15 dans le reformage sec du méthaneHassan, Nissrine El ; Geagea, Henry; El Zein, H; Casale, Sandra; Zakhem, Henri El 
172009Etude des mécanismes de corrosion du T91 dans le Pb-Bi à 540°C sous teneur contrôlée en oxygèneHassan, Nissrine El ; Martinelli, Laure
182004Fabrication aids for cold bending structural steel girdersGergess, Antoine 
192004Fabrication aids for cold straightening I-girdersGergess, Antoine ; Sen, Rajan
202005Fabrication of unsymmetrical curved plate girders by cold bendingGergess, Antoine ; Sen, Rajan