Showing results 73 to 92 of 174
< previous
next >
| Issue Date | Title | Author(s) |
| 2018 | Finite element simulation of cracks propagation in rolling contact applications with and without coating applied in industrial field | Nehme, Gabi ; Esber, Monzer Al |
| 2018 | First steps toward the investigation of the aerosol transport in the human lungs | Fakhreddine, Omar; Khoury, Gerard; Bassil, Assaf; Kfoury, Adib ; Sabat, Mira ; Sabat, Macole |
| 2011 | Fluorinated FeF3 catalyst interactions in three different oil formulations using design of experiment optimization and chemistry characterization of tribofilms | Nehme, Gabi |
| 2012 | Fluorinated interactions in two different plain ZDDP oils using design of experiment (DOE) and chemistry characterization of tribofilms | Nehme, Gabi |
| 2011 | Fluorinated mix in plain ZDDP oil and commercial oil using design of experiment analysis of all interactions and fundamental study of fluorinated mix in plain ZDDP oils under 2 different r/min test cycles and extreme boundary lubrication | Nehme, Gabi ; Dib, Micheline |
| 2016 | Friction and wear reductions in fluorinated plain and fully formulated oils through enhanced heating time using moderate loading under boundary lubrication conditions | Nehme, Gabi |
| 5-Jun-2023 | Generating rectilinear motion using permanent magnets | Rishmany, Jihad ; Sabiini, Guitta; Mansour, Ali; Imad, Rodrigue |
| 2015 | GIS as a decision support tool for locating composting plant | Hoz, Mervat El; Iaaly, Amal |
| 2018 | A GIS based study of the contamination of water by Polycyclic Aromatic Hydrocarbons (PAHs) | Hoz, Mervat El; Jabali, Yasmine ; Iaaly, Amal ; Millet, Maurice |
| 2021 | A GIS multiple criteria decision approach using AHP for solar power plant: the case of North Lebanon | Iaaly, Amal ; Karami, Nabil; Khayat, Nachaat |
| 27-May-2023 | A Highly Efficient Computer Vision Approach for Tennis Ball Retrieval with Limited Computational Power | Wahidi, Malek; Imad, Rodrigue ; Rishmany, Jihad |
| 2001 | A hybrid macro/micro-mechanical formulation of composites under thermo-mechanical loading | Honein, Elie ; Rai, Habib ; Najjar, Michel; Abou Antoun, S.N |
| 2011 | Impact of pressure distribution on the relief areas of prosthetic sockets for transtibial amputees using design of experiment and finite element analysis | Nehme, Gabi ; Dib, Micheline |
| 2014 | The impact of surface roughness and PTFE/TiF3/FeF3 additives in plain ZDDP oil on the friction and wear behavior using thermal and tribological analysis under extreme pressure condition | Nehme, Gabi ; Ghalambor, Saeed |
| 2005 | Implementation of problem-based learning into engineering thermodynamics | Nasr, Karim ; Ramadan, B |
| 2015 | The importance of 2 per cent PTFE/FeF3 additives in engine fully formulated oil for reducing friction and wear under boundary lubrication condition | Nehme, Gabi ; Ghalambor, Saeed |
| 2012 | The importance of extreme pressure cyclic load in molybdenum Disulfide greases using 4 balls wear tests | Nehme, Gabi |
| 2018 | The importance of spectrum loading in 2% milled MoS2 powder greases using four ball wear test | Nehme, Gabi |
| 2013 | The Importance of Variable Speeds under Extreme Pressure Loading in Molybdenum Disulfide Greases Using Four-Ball Wear Tests | Nehme, Gabi |
| 2019 | Influence of electrode spacing on a symmetrical washer-type electrohydrodynamic conduction pump | Daaboul, Michel ; Traore, Philippe; Modh, Sachin; Louste, Christophe |
