Showing results 114 to 133 of 174
< previous
next >
| Issue Date | Title | Author(s) |
| 2014 | A numercial investigation of the skin friction coefficient and nusselt number in a laminar wall jet that evolves from a parabolic velocity profile to its self-similar behavior | Issa, Johnny; Ortega, Alfonso |
| 2023 | NUMERICAL AND EXPERIMENTAL STUDY ON THE EFFECT OF OVERLAP ON SAVONIUS WIND TURBINE | Alomar, Zaki; Khoury, Gerard; Rishmany, Jihad ; Daaboul, Michel |
| 2004 | Numerical computation of the heat transfer and fluid mechanics in the laminar wall jet and comparison to the self-similar solutions | Issa, Johnny; Ortega, Alfonso |
| 1-Jan-2023 | Numerical Estimation of the Electric Force Induced by a Cylinder-to-Cylinder EHD Device | Matar, Ihssan; Louste, Christophe; Daaboul, Michel |
| 2016 | A numerical investigation of heat transfer in a rotating enclosure | Issa, Johnny; Saliba, Najib G. ; Dib, Ghady |
| 2016 | A numerical investigation of the effect of inlet velocity oscillation on heat transfer in a two-dimensional laminar jet impinging on an isothermal surface | Issa, Johnny; Saliba, Najib G. ; Sidnawi, Bchara |
| 2019 | A numerical investigation of the thermal and hydrodynamic behaviors of a channel with rectangular pin fins in aligned and staggered configurations | Issa, Johnny; Cheikh, Amina El |
| 2017 | Numerical modelling of lean duplex stainless steel and assessment of existing design methods | Saliba, Najib G. ; Issa, Johnny |
| 2010 | Numerical simulation and PIV experimental analysis of electrohydrodynamic plumes induced by a blade electrode | Traore, Philippe; Daaboul, Michel ; Louste, Christophe |
| 2018 | A Numerical study of heat transfer and fluid flow in a channel with an array of pin fins in aligned and staggered configurations | Issa, Johnny; Saliba, Najib G. ; Cheikh, Amina El |
| 2021 | OLS modeling using GIS for aviation safety within a challenging topographic and urban neighborhood: the case of Beirut Rafic Hariri International Airport | Alhassanieh, Nael; Nassar, Michelle; Aouad, Angele; Jadayel, Oussama; Iaaly, Amal |
| 2017 | Optimization of a typical BIW component using tailor welding technique via FEA | Saba, Nicolas ; Rishmany, Jihad ; Daaboul, Michel ; Tawk, Issam |
| 2017 | Optimization of a vertical axis wind turbine using FEA, multibody dynamics and wind tunnel testing | Rishmany, Jihad ; Daaboul, Michel ; Tawk, Issam ; Saba, Nicolas |
| 2014 | Optimization of extreme load and break-in period in plain ZDDP oil with FeF3 catalyst using design of experiment and fundamental study under different speeds | Nehme, Gabi ; Dib, Micheline |
| 2014 | Optimization of important relief areas in prosthetic socket for below-knee amputees using design of experiment and finite element model | Nehme, Gabi ; Ghalambor, Saeed |
| 2010 | Optimization of mechanism of boundary lubrication in fully formulated commercial engine oil using design of experiment | Nehme, Gabi ; Dib, Micheline |
| 2017 | Optimization of the production process of an A-pillar using a differential thickness profile approach via FEA | Saba, Nicolas ; Rishmany, Jihad ; Tawk, Issam ; Daaboul, Michel |
| 1-Dec-2024 | Optimizing Suspended Sediment Models: A Novel Expert System with Spatial Probabilities and Isolated Points | Sabat, Mira ; Terfous, Abdelali; Ghenaim, Abdellah; Sabat, Macole ; Draybi, Michel; Romanos, Jimmy |
| 2011 | Passing GIS Know-how from University Students to secondary School Students : pedagogical Approach in developing youngsters Capabilities and Understanding in GIS | Iaaly, Amal ; Jadayel, Roula; Jadayel, Oussama Chafiq |
| 2018 | Pavement management system: an integrated GIS assessment approach | Saroufim, Edwina; Iaaly, Amal ; Gerges, Najib N. |
